Living For Sail · βίντεο

Τι καλύπτει αυτό το βίντεο

Rot and wet core throughout the transom of a 1989 Liberty 458 named Antidote forces a full re-core during a driveway restoration.0:29 John, an engineer and sailor, chooses to attack the repair from the interior rather than the exterior, a decision driven by the opportunity to refresh the cabin and limit damage to original woodwork.1:09 The work begins by removing teak trim and numbered teak battens — numbering them with masking tape to preserve reinstallation order — then cutting and prying out three sections of interior plywood to expose the full transom wall.2:46 Stainless screws hidden under filler require sanding to locate, and three stripped fasteners need cutting out.13:58 A sagging bunk beam, apparently broken at some point, is flagged for replacement while the area is open.15:39 On the transom itself, John marks a 5-inch cutback to allow a 1-to-12 scarf joint for new fiberglass.18:16 He tests the Freedom Pro blade-sharpening system from Tiger Teeth, Battle Creek, Michigan, to revive worn oscillating saw blades cutting through fiberglass.19:44 Bronze backing plates bedded behind the hardware are recovered intact for reuse.27:48 The core removal is partially complete at the episode's end, with the lower transom glass found thin enough to cut back to a 2-inch overhang.28:09

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Living For Sail

BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My BoatΑυγ 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!Ιουλ 2026⛵️ This DIY Sailboat Repair Has To Work... Right?Ιουν 2026Uh oh... 2 Reasons why there is No New Video Today...Μαΐ 2026

Από Living For Sail — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.