Sampson Boat Co · βίντεο

Τι καλύπτει αυτό το βίντεο

The Tally Ho restoration project focuses on preparing the hull for planking by finalizing the transom, casting bronze floor timbers, and fairing the frames. The transom is permanently fastened to the stern post using 5/8-inch bronze rods, mirroring the original construction method.1:27 To ensure watertight seams, the grain along the plank edges is compressed with a ball-peen hammer to create a small hollow for caulking cotton, which expands when wet.4:01 Bedding compound mixed with pine tar seals the joints, while red lead primer protects the softwood splines from rot.3:18 Simultaneously, the crew utilizes a three-part sand mold and a pneumatic ram at the Port Townsend Foundry to accelerate the production of bronze floor timbers.11:49 These floors are ground and polished to a high finish before being dry-fitted to the frames and keel.23:30 The work continues with fairing the rabbit line and frames to ensure a smooth, fair curve for the upcoming planking process.17:49

Περισσότερα από το Sampson Boat Co

Tally Ho sails into England after 59 years overseas!Αυγ 2026A very brief update from the Fal estuaryΑυγ 2026Piracy and Peril - stories from the boatyards of West CorkΑυγ 2026Tally Ho completes her Atlantic Crossing at the Fastnet Rock!Αυγ 2026

Από Sampson Boat Co — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.