Catamaran Mistertong · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of the catamaran Mistertong troubleshoots a failed watermaker and replaces a damaged outboard propeller for their dinghy. The watermaker failed to start because the Jabsco feed pump seized, likely due to corrosion on the internal impeller shaft or vanes.8:16 After failing to disassemble the pump housing due to corroded screws, the owner manually rotated the impeller with a screwdriver to break the friction.8:16 This restored the pump's ability to prime the system, allowing the watermaker to produce water again.13:08 The owner notes that the system includes a safety feature that cuts power if the pump fails to deliver water, which had been blowing a 3-amp fuse.13:55 Separately, the crew replaces the dinghy's propeller after the previous one sustained damage, restoring the tender's performance for shore trips.3:31 The crew confirms that regular operation of the watermaker is essential to prevent the feed pump from seizing during periods of inactivity.14:41

Περισσότερα από το Catamaran Mistertong

#242 The engine is no longer spitting!!!Αυγ 2026#241 Friends arriving, time to rest soon!!Αυγ 2026#240 Coppercoat, part two and conclusion ...Αυγ 2026#239 We are applying Coppercoat to the port hullΙουλ 2026

Από Catamaran Mistertong — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.