The On Deck Channel · βίντεο

Τι καλύπτει αυτό το βίντεο

Installing an ARCO Zeus Omega alternator regulator involves mounting the control module and alternator drive module (ADM), connecting the stator and field wires, and attaching a Hall effect sensor to the battery or alternator cable to measure current.3:09 On a Leopard 50 catamaran, the system requires one control module and an ADM for each engine, linked by NMEA 2000 cables.4:27 When installing on a case-ground alternator, the temperature sensor must be placed on the terminal stud first, followed by the regulator’s ring terminals, to ensure proper contact.6:19 The control module should be mounted in a location with clear line-of-sight for Bluetooth and Wi-Fi connectivity, while keeping the voltage-sensing power wires relatively short to minimize voltage drop.12:24 The system supports optional inputs for traditional shunts, battery temperature probes, and ignition sources, though most installations only require the primary power and sensor connections.13:44 Proper strain relief for cables at the alternator is critical to prevent vibration-induced stud failure.9:18

Σκάφη σε αυτό το βίντεο

Περισσότερα από το The On Deck Channel

24 shipping containers. A lot more than rigging!Αυγ 2026Moving from a Full Size Kitchen to a Boat Kitchen | New to Boat Life SeriesΑυγ 2026Quick Overview of Marine Heads on Aluminum Boats | New to Boat Life SeriesΑυγ 2026Sails Have Not Been Raised Since 2012 | Relax, Kick Back & Come for a Sail on NomadΙουλ 2026

Από The On Deck Channel — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.