The On Deck Channel · video

What this video covers

Installing an ARCO Zeus Omega alternator regulator involves mounting the control module and alternator drive module (ADM), connecting the stator and field wires, and attaching a Hall effect sensor to the battery or alternator cable to measure current.3:09 On a Leopard 50 catamaran, the system requires one control module and an ADM for each engine, linked by NMEA 2000 cables.4:27 When installing on a case-ground alternator, the temperature sensor must be placed on the terminal stud first, followed by the regulator’s ring terminals, to ensure proper contact.6:19 The control module should be mounted in a location with clear line-of-sight for Bluetooth and Wi-Fi connectivity, while keeping the voltage-sensing power wires relatively short to minimize voltage drop.12:24 The system supports optional inputs for traditional shunts, battery temperature probes, and ignition sources, though most installations only require the primary power and sensor connections.13:44 Proper strain relief for cables at the alternator is critical to prevent vibration-induced stud failure.9:18

Boats in this video

More from The On Deck Channel

Sails Have Not Been Raised Since 2012 | Relax, Kick Back & Come for a Sail on NomadJul 2026The ARCO Zeus Omega | 6,000+ Watts on TAP | No More GeneratorJun 2026Is Buying a HUGE Live-In Project Boat a Good Idea for a Family?Jun 2026Dimmer Install & Writing Analogue | New to Boat LifeMay 2026

From The On Deck Channel — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.