Project Brupeg · βίντεο

Τι καλύπτει αυτό το βίντεο

Damien compares three types of paint rollers used during the three-year rebuild of the boat Brewpig, which has required approximately 500 liters of paint.0:01 Open-cell foam rollers provide the thinnest coat and the best finish among roller options, though they lack the quality of a sprayed surface.0:43 High-nap "fluffy" rollers hold significant amounts of paint, allowing for a "bow wave" technique that applies thick coats; to prevent loose bristles from contaminating the finish, he recommends scuffing new rollers with a wide brush before use.2:15 Mohair rollers, often recommended for two-part epoxies, produce an orange-peel texture that he finds inferior to other methods.2:46 Spraying remains the preferred method for large surfaces, offering superior gloss and speed compared to rolling or tipping.3:41 While setting up a spray gun takes time, it significantly reduces labor hours on large projects like cabin or kitchen refits.4:00

Περισσότερα από το Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463Οκτ 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462Σεπ 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461Σεπ 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460Σεπ 2026

Από Project Brupeg — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.