Sailing Zephyr · βίντεο

Τι καλύπτει αυτό το βίντεο

James and Natalie of the 40-ft sailboat Zephyr replace three broken zippers on their dodger while anchored in Marsh Harbour, The Bahamas.1:56 High winds and rain necessitated the repair, as the missing center window allowed water into the cockpit.1:40 With the help of a friend who owns a Sailrite LSZ-1 sewing machine, the crew removes the old seams using a seam ripper.3:53 They use oversized black zippers because they are more affordable and readily available than white alternatives.0:47 The repair process involves using a hot knife to cut the zippers to length and melt the ends to prevent fraying, followed by applying sewing tape to hold the zippers in place before stitching.7:20 After sewing the vertical and horizontal zippers, they install a zipper stopper with pliers to prevent the pull from sliding off.8:35 The completed dodger is scrubbed and reinstalled on the boat, successfully sealing the cockpit against the elements.11:48

Περισσότερα από το Sailing Zephyr

We Finally Fixed the Worst-Looking Part of Our Boat Ep. 277Ιουν 2026We Somehow Made It To The Bahamas...Then The Boat Work Started - Ep.276Ιουν 2026Our New Boat Finally Hits The Water - Ep. 275Μαΐ 2026The Reality of Getting This Boat Ready - Ep. 274Μαΐ 2026

Από Sailing Zephyr — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.