pabloberrusails · βίντεο

Τι καλύπτει αυτό το βίντεο

Pablo Berrus adds 50 meters of anchor chain to his boat in preparation for a solo circumnavigation, bringing total chain length from 30 meters to 80 meters, supplemented by roughly 30–35 meters of rope rode.0:02 The existing 30-meter chain was judged too short for safe anchoring.0:02 Before buying, he visits the boat to collect a chain sample, because two different link types exist for the same diameter and he needs to match the existing chain.0:08 At the chandlery he buys the 50-meter length, then returns to the boat to install it.0:14 He also paints the chain at 5- and 10-meter intervals so he can read out scope while anchoring without counting shackles.0:17 He notes he still needs to buy two additional anchors as spares.0:56 The full ground-tackle setup will be: two anchors, 80 meters of chain, and 30–35 meters of rope.1:04 Marking chain at regular intervals is a practical fix for monitoring scope when anchoring solo.

Περισσότερα από το pabloberrusails

Sailing through the Strait of MalaccaΣεπ 2026I'm hauling the boat out of the water in MalaysiaΣεπ 2026Solo sailing around the world: How do I stay connected while traveling?Αυγ 2026Solo sailing around the world #20 - Change of plans: heading to LangkawiΑυγ 2026

Από pabloberrusails — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.