Be The Captainβίντεο

How to Heave To on a Sailboat

12 Ιανουαρίου 2025 · 13 λεπτά · 174K προβολές

Τι καλύπτει αυτό το βίντεο

To heave to on a Beneteau 47.7, the helmsman disengages the autopilot, tacks the boat through the wind, and allows the jib to backwind. Once the jib is backwinded, the wheel is turned hard over in the opposite direction and locked in place. The mainsail must be trimmed tight to the centerline to stabilize the boat. If the boat remains beam-to the waves or fails to maintain a comfortable angle, the crew must balance the sail plan by furling the jib or adjusting the mainsail reefing. A large, full jib on a light, fin-keel production boat can push the bow away from the wind, causing the boat to drift poorly or circle. Heaving to on one tack often provides a more stable, comfortable motion than the other depending on wave state and current. To exit the maneuver, the helmsman releases the wheel and tacks the boat through the wind. For storm conditions, route jib sheets inside the shrouds to prevent chafe during prolonged exposure to high winds.

Παρακολουθήστε στο YouTube

Σκάφη σε αυτό το βίντεο

Beneteau First 47.7Περιηγήθηκε

Περισσότερα από το Be The Captain

25 People Abandoned an Unsinkable Ship. None Survived | The Joyita MysteryΣεπ 202631 Crew Sailed Into Hurricane Mitch. None Were Ever Found | The Tragic Story of SV FantomeΑυγ 2026Declared Dead at Sea — Then They Came Back | The Rose-Noëlle StoryΙουλ 2026My Final Video as Sailing ZingaroΙουλ 2026

Από Be The Captain — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.

Αναφορά προβλήματος