Wildly Intrepid Sailingβίντεο
Troubleshooting a Westerbeke ALTERNATOR
18 Σεπτεμβρίου 2024 · 11 λεπτά · 1K προβολές
Τι καλύπτει αυτό το βίντεο
A Westerbeke alternator on a cruising sailboat fails to charge the battery bank due to a loose grounding bolt and a corroded, snapped lock washer on the tensioning bracket.7:16 The initial failure manifests as sparking and intermittent output, caused by a poor ground connection between the alternator casing and the engine block.0:26 After the owner attempts to troubleshoot the unit while underway in the Pongo River, a second issue arises: the loose tensioning bolt allows the alternator to shift, causing the drive belt to slacken and preventing the regulator from reaching the necessary voltage to initiate charging.7:57 Additionally, the loose bolt compromises the seal on a coolant assembly, resulting in an antifreeze leak that produces smoke.7:16 Replacing the corroded lock washers and properly tensioning the belt restores the alternator's output.10:19 The experience confirms that a loose drive belt can prevent an alternator from spinning at sufficient RPM to trigger the internal regulator, even if the unit appears to be rotating.11:06
Περισσότερα από το Wildly Intrepid Sailing
Από Wildly Intrepid Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.
The Sailing Directory Newsletter
Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.



