Entre Terras e Mares · βίντεο

Τι καλύπτει αυτό το βίντεο

Edgar replaces the acrylic panels on a set of boat hatches by cutting 8mm acrylic sheets purchased from Bold.1:35 He uses a jigsaw equipped with a fine-toothed metal-cutting blade to achieve a clean finish without splintering or chipping the material.2:06 Beyond the four hatch panels, he cuts an additional piece for the companionway door.1:49 While Edgar prepares the acrylic and cuts ceiling wood for interior finishing, Sâmia and Davi apply polyester filler to the hatch lids to prepare them for painting.5:31 The work process involves Edgar acting as a material supplier for his crew to ensure they can continue their respective tasks, such as laminating edges and installing interior trim.7:37 The project progress was briefly interrupted by a 107 km/h windstorm in São Paulo that caused a 24-hour power outage.9:30 Using a jigsaw with a metal-cutting blade provides a precise, manageable method for cutting acrylic sheets at home.

Περισσότερα από το Entre Terras e Mares

90% of the STRUCTURE is READY S1.ep 183Ιουλ 2026WE FINISHED the bow cabin LAMINATE ! S1.ep182Ιουν 2026WE DID IT, WE FINISHED PART OF THE FORMICA IN THE BOW SUITE S1.ep 181Ιουν 2026This week the focus was on something elseΙουν 2026

Από Entre Terras e Mares — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.