Project Brupeg · βίντεο

Τι καλύπτει αυτό το βίντεο

The owner of the 10-year-rebuilt fishing trawler *Brupeg* modifies the vessel’s stabilizer wing deployment system by installing sacrificial M30 threaded rod studs on the deck.0:53 These studs allow the stabilizer arms to seat directly onto the deck, replacing a manual bolting process.0:53 To facilitate the transition to electric winches for wing deployment, the crew replaces an undersized, welded-on pulley with a custom-fabricated stainless steel assembly designed to accommodate 12mm Dyneema line.6:45

Separately, the crew investigates a rhythmic whining noise originating from the propeller shaft while in forward gear at idle.11:56 After consulting with marine mechanics, they diagnose the issue as insufficient lubrication at the stern tube’s rear seal, likely caused by a blocked grease port.20:57 They resolve the noise by replacing a grease distribution manifold block with a higher-volume unit, increasing grease flow to the rear bearing.24:37 The crew also performs a gearbox oil change, switching to a mono 40 grade oil to better suit tropical operating temperatures.12:17 Regular oil analysis is planned for the future to monitor drivetrain wear.18:07

Περισσότερα από το Project Brupeg

Over Engineering a Simple Bracket - Project Brupeg Ep. 458Αυγ 2026How strong to you want this winch mount? Brupeg strong... Project Brupeg Ep.457Αυγ 2026Was the outboard rebuild worth it and Brupeg has developed a worrying noise... Project Brupeg Ep.456Αυγ 2026Three Builds, One Croc Sanctuary: Boat Life on Brupeg - Project Brupeg Ep.455Αυγ 2026

Από Project Brupeg — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.