Sailing Yabá · βίντεο

Τι καλύπτει αυτό το βίντεο

The 38-ft sailboat *Yabá* returns to the water after a multi-month refit in a Brazilian shipyard.▶ 0:07 Before launching, the crew installs two additional bronze anodes on the hull and repairs a small section of the stern where anti-fouling paint failed to adhere.▶ 1:59 The launch timing is dictated by a narrow tidal window, requiring the vessel to enter the water on the final day of the current cycle to avoid a two-week delay.▶ 8:04 Once afloat, the engine fails to maintain power due to air trapped in the fuel system following a filter change.▶ 22:47 The crew identifies a faulty aluminum washer on the fuel filter housing as the source of the air leak.▶ 25:02 After bleeding the system and tightening the fuel connections, the engine stabilizes.▶ 26:01 The crew plans to remain docked at the shipyard for final deck projects before beginning a six-month northward passage along the Brazilian coast.▶ 26:47

Περισσότερα από το Sailing Yabá

the hardest video we ever made.Ιουν 2026One Last Job Before We Launch Our Wooden Boat — Sailing YabáΜαΐ 2026We NEED to Get This Boat Ready to Float NOW! — Sailing YabáΜαΐ 2026No Going Back: Moving our Boat Deeper into the Shipyard (and Further From Launching)Απρ 2026

Από Sailing Yabá — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.