Sailing Good, Bad, and Ugly · βίντεο

Τι καλύπτει αυτό το βίντεο

After losing the steel rudder of the 200-pound-displacement vessel Good, Bad, and Ugly in Key West, the owner performed an underwater reinstallation without hauling the boat.11:48 The rudder had detached after becoming entangled with a crab trap line.0:59 To prepare the steel for reinstallation, the crew scraped off old growth, filled surface pits with JB Weld Steel Stick, and applied anti-fouling paint purchased from West Marine.2:47 Because the rudder does not float, the owner used a bumper lashed to the unit to provide buoyancy for underwater maneuvering.7:01 The installation required multiple attempts due to incorrect bolt sizing and heavy chop from passing jet skis.10:19 The final assembly utilized 3/8-inch stainless steel bolts and lock nuts.13:15 The owner advises allowing ample drying time for anti-fouling paint to prevent chipping during installation and emphasizes the importance of checking local current conditions before attempting underwater repairs.13:34

Περισσότερα από το Sailing Good, Bad, and Ugly

Infested, Moldy Disaster to Dream Transformation Start to FinishΣεπ 2026IT’S FINALLY DONE!Σεπ 2026We Needed a Win and This Wasn’t ItΑυγ 2026The End Is Finally NearΑυγ 2026

Από Sailing Good, Bad, and Ugly — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.