Sailing Catalpa · βίντεο

Τι καλύπτει αυτό το βίντεο

Lee and Sarah upgrade the solar array on their center-cockpit sailboat, Catalpa, by replacing a deteriorating canvas bimini with a rigid, custom-built hardtop.▶ 4:44 The project increases their total solar capacity from 1,440 watts to 2,400 watts using 12 new 200-watt Renogy solar panels.▶ 14:12 To manage shading from the mast and rigging, the crew selects these panels for their improved shade management and diode configuration.▶ 3:38 Lee constructs the support frame using existing tracks and aluminum tubing, reinforcing the joints with spot welds to prevent the structure from pulling apart under load.▶ 6:39 To ensure the hardtop remains watertight, the crew fills the four-millimeter gaps between panels with foam backer rod before applying TotalBoat sealant.▶ 11:38 During installation, an initial attempt to wire three panels in series triggered an over-current error on their 150-volt Victron controller, forcing a switch to a parallel wiring configuration.▶ 9:19 The new setup provides a 70% increase in power generation, allowing for greater energy independence while preparing for a Pacific crossing.▶ 14:33

Περισσότερα από το Sailing Catalpa

Preparations continue for our ocean crossing Episode 497Ιουν 2026Installing AIS & VHF Before Our Pacific Crossing Episode 496Ιουν 2026Preparing our dinghy for remote adventures in the pacific Episode 495Ιουν 2026Save $$$ Servicing Your Own 15HP Mercury Outboard (4-Stroke) Episode 494Ιουν 2026

Από Sailing Catalpa — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.