Living For Sail · βίντεο

Τι καλύπτει αυτό το βίντεο

John, the owner of a 1989 Liberty 458 named Antidote, continues a deck restoration project by removing a stubborn, corroded hatch and addressing water-damaged balsa core.0:07 After consulting with Andy from Boatworks Today, John decides to cut out the entire raised hatch lip rather than attempting a difficult repair from below.8:18 He uses an impact driver to remove the hatch fasteners and a heat gun and pry bar to break the adhesive seal.12:49 The removal process proves difficult due to thick layers of polyester resin and fiberglass, confirming that attempting the job from the cabin ceiling would have been impractical.17:14 Upon removal, he discovers significant rot in the underlying balsa core and a fiberglass layer extending under the coach roof.19:57 John plans to rebuild the entire area with new core material and a custom-fabricated rim. He uses Divinycell foam for core replacement and secures his work area with Dr. Shrink preservation tape.6:34

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Living For Sail

Completing this repair BEFORE it’s TOO LATE!Οκτ 2026Can I Save This Bronze Cleat? Sailboat Bulwark RebuildΣεπ 2026This Was Inside The Boat!? — Should I Put It Back?Σεπ 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My BoatΑυγ 2026

Από Living For Sail — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.