Stella Overboard · βίντεο

Τι καλύπτει αυτό το βίντεο

Jesse sourced a Johnson Pump Wiking Power 16 bilge pump from Australia after Camille Milligan's first attempt failed because the original pump was too large for the bilge compartment. The installation involves wiring the pump's electrical cables to the boat's power supply, securing screws in a tight, awkward compartment, and routing discharge hoses through the hull. The crew tests the pump on the automatic setting by deliberately flooding the bilge, confirming the float switch activates and water discharges correctly. Camille explains the bilge pump's role as an automatic safety system that removes water from the lowest point of the hull — triggered by rain ingress, rogue waves, or slow leaks — and distinguishes it from the manual backup pump every boat carries for electrical-failure scenarios. The confined installation space and screw alignment in the cramped compartment are the main practical difficulties. Once wired and mounted, the pump runs on auto, meaning it activates without crew input if water accumulates while the boat is unattended. Jesse rates the project straightforward once the correct pump dimensions and wiring direction are understood.

Περισσότερα από το Stella Overboard

American & Australian Couple Living on a Sailboat & Traveling the WorldΣεπ 2026INSANE Fishing From Our Sailboat! Mahi Mahi & WahooΣεπ 2026The Reality of Off-Grid Sailing: Trouble in ParadiseΣεπ 2026Crossing the Equator in Search of Waves & Fish | Sailing IndonesiaΑυγ 2026

Από Stella Overboard — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.