Sail Life · βίντεο

Τι καλύπτει αυτό το βίντεο

Restoration of the 30-foot sailboat Athena requires extensive deck and cockpit preparation before applying a two-part primer. To stabilize the cockpit sole and cabin top, the owner fills through-bolt holes with thickened epoxy and reinforces areas with fiberglass laminate.5:21 Voids discovered between the fiberglass skin and the core are injected with thickened epoxy to restore structural integrity.7:47 The owner fabricates a custom "Franken bit"—a modified router bit—to achieve a uniform round-over on the cabin top edges.9:24 After removing old paint from the cockpit sole using scrapers and sandpaper, the owner cleans the surfaces with thinner to ensure compatibility with the new coating.17:06 The project concludes with the application of Sigma Cover 280 primer from PPG, chosen for its cost-effectiveness compared to consumer-grade alternatives.17:56 Proper surface preparation, including fairing low spots and removing old one-component paint, remains essential for successful adhesion of two-part epoxy primers.

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Sail Life

The road back to boat work: Bunker roof, done! Ep. 699Οκτ 2026The road back to boat work: A bunker surprise. Ep. 698Οκτ 2026BUNKER vs. LASER - xTool MetalFab laser welder and CNC Ep. 697Σεπ 2026The road back to boat work: Bunker Makeover! Ep. 696Σεπ 2026

Από Sail Life — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.