RAN Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

Planking progress on a 50-foot custom boat requires cutting a straight center line down the hull to allow port and starboard cedar strips to meet.1:15 Johan uses a track-mounted plunge saw to achieve this, securing the track with wedges and drilled holes to ensure a 90-degree cut.4:36 The stern section remains open, requiring approximately 10 to 11 additional strips to close the hull.2:16

To secure the remaining materials, Johan travels to the northern part of the island of Öland to source western red cedar.9:21 These trees, planted in the 1880s, were harvested following storm damage.14:35 Because the trees are younger than the old-growth timber previously sourced from British Columbia, the planks contain more knots, requiring careful selection for the hull.15:03 Johan purchases two cubic meters of timber for $1,000, intending to use the knot-free sections for the hull and the remainder for deck beams or stern components.19:49

Properly aligning the track for the center-line cut prevents angled edges and ensures structural integrity when joining hull planks.4:49

Περισσότερα από το RAN Sailing

There's No Manual For This! Building Our Own 52ft Sailboat - Ep. 506 Ran SailingΟκτ 2026Carbon Pillars & No Dorade Boxes! - Building Our 52ft Sailboat - Ep. 505 Ran SailingΟκτ 2026Will the Sanding EVER End? Building Our Dreamboat - Ep. 503 Ran SailingΣεπ 2026Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502Σεπ 2026

Από RAN Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.