Eternal Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

A couple hauls out their J42 catamaran in Pilada for a week of maintenance after two years in the water.0:50 The primary tasks include replacing old brass through-hull valves with TruDesign composite fittings and relocating the toilet seawater intake by one meter to prevent interference between the inlet and outlet.5:11 The owner uses a step drill bit to remove the old valves and fills the original hole with a wooden plug bonded with thickened epoxy before laminating over it with biaxial fiberglass.6:43 Additional repairs involve stripping and drying localized wet spots on the hull stringers and keel area, which are then treated with thinned epoxy and reinforced with biaxial cloth.13:12 The owner also addresses corrosion on the outboard motor’s power trim hydraulic housing, planning to clean and repaint the units to prevent further degradation.14:39 While inspecting the starboard hull, the owner identifies structural concerns near the keel that require further investigation.7:31

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Eternal Sailing

Can I fix ALL of this? 😟 Shipyard Part 2/2Αυγ 2026Exploring an abandoned industrial site 😯Ιουν 2026We want to go on a long-distance cruise again! 😍 SO MUCH TO DO!! 🔧Ιουν 2026Back on board after 5 months! But WHAT HAPPENED HERE?? 😬Φεβ 2026

Από Eternal Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.