Sailing Zephyr · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of the 45-ft sailboat Zephyr attempts to repair a long-standing crack in their plastic water tank using G/flex 655 thickened epoxy.4:07 After removing the tank, they sand the surface, clean it with acetone, and pass an open flame over the plastic to remove impurities before applying the adhesive.3:52 They allow the epoxy to cure for 48 hours before reinstalling the tank and filling it at a fuel dock.5:21 Despite these efforts, the tank leaks again immediately upon filling.8:53 The crew also reports a failure of their water maker, which they attribute to a faulty high-pressure pump currently awaiting replacement.0:57 To celebrate a birthday, the crew anchors at Water Cay in the Bahamas, utilizing an 11:1 scope to manage expected storm conditions.14:05 The repair attempt confirms that standard epoxy adhesives fail to provide a permanent seal for plastic water tanks subject to hull flex.

Περισσότερα από το Sailing Zephyr

We Finally Fixed the Worst-Looking Part of Our Boat Ep. 277Ιουν 2026We Somehow Made It To The Bahamas...Then The Boat Work Started - Ep.276Ιουν 2026Our New Boat Finally Hits The Water - Ep. 275Μαΐ 2026The Reality of Getting This Boat Ready - Ep. 274Μαΐ 2026

Από Sailing Zephyr — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.