Project Brupeg · βίντεο

Τι καλύπτει αυτό το βίντεο

Damien and Jess install a custom dinghy davit system on their trawler, Brewpeg, by modifying a single-drum winch to operate two separate lifting lines.6:02 To prevent the dinghy from swaying, they split the winch drum into two hemispheres by TIG-welding an aluminum divider plate into the center.9:30 This modification requires stripping the winch to its base components, including the gearbox and clutch, to ensure the internal mechanism remains functional.6:02 They mount the winch on the wheelhouse roof using a custom stainless steel plate to avoid drilling multiple holes into the thin-walled aluminum roof ribs, which would risk internal corrosion.4:30 The crew routes Dyneema lines through a series of pulleys to align the lift points with the dinghy’s center of gravity.24:24 Electrical power for the winch runs through a Victron battery protect switch, though the crew notes that the 100-amp limit may be insufficient for the high-draw winch motors, necessitating a potential upgrade to a higher-amperage model.29:06

Περισσότερα από το Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463Οκτ 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462Σεπ 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461Σεπ 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460Σεπ 2026

Από Project Brupeg — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.