Sailing Avanti · βίντεο

Τι καλύπτει αυτό το βίντεο

Adjusting valve clearances on a Volvo Penta D2-50 engine requires removing the rocker cover, air filter housing, and air intake manifold to access the cylinder head. The manufacturer recommends this service every 600 hours or four years.0:59 To perform the adjustment, rotate the engine to top dead center for each cylinder using a makeshift tool inserted into the crank pulley holes, as standard large sockets may not fit in tight engine compartments.7:56 Use a 0.2 mm feeler gauge to measure the gap between the tappet and rocker.9:48 Apply the "rule of nine" method to ensure each valve is fully closed before checking: when a specific valve is fully open, the valve whose number sums to nine with it is ready for adjustment.10:10 If the feeler gauge is too tight or loose, loosen the lock nut with a 10 mm spanner and adjust the screw until the gauge slides with slight resistance.13:06 Four of the eight valves on the D2-50 required adjustment during this procedure.15:49

Περισσότερα από το Sailing Avanti

CIRCUMNAVIGATED - WE DID IT EP136Ιαν 2025WILD COAST sailing EP135Ιαν 2025Sailing from Richards Bay to Durban in December EP134Ιαν 2025Trying to leave Richardsbay EP133Δεκ 2024

Από Sailing Avanti — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.