How To Make MC4 Connectors (For Wiring Your Camper Solar Panels)
5 Απριλίου 2020 · 3 λεπτά · 486K προβολές
Τι καλύπτει αυτό το βίντεο
Nate demonstrates the assembly of MC4 connectors for solar panel wiring, specifically for creating extension cables between panels and charge controllers.Watch To build a female MC4 connector, crimp a male copper pin onto the stripped wire using ratcheting wire crimpers.1:38 After verifying the crimp with a firm tug, slide the end cap, strain relief, and compression sleeve onto the wire.1:57 Insert the wire into the female connector body until it clicks, then tighten the end cap to secure the compression sleeve.2:01 The process for a male MC4 connector is identical, but requires crimping a female copper pin onto the wire before inserting it into the male connector housing.2:22 Solar panels typically feature a male connector on the positive lead and a female connector on the negative lead, necessitating the use of the opposite gender connector on extension wires.1:15 Always confirm polarity with a multimeter before finalizing connections. Proper crimping and ensuring the internal pin clicks into the housing are essential for a secure, weather-resistant connection.
Περισσότερα από το EXPLORIST life Mobile Marine & Off-Grid Electrical
Από EXPLORIST life Mobile Marine & Off-Grid Electrical — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.
The Sailing Directory Newsletter
Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.