Sampson Boat Co · βίντεο

Τι καλύπτει αυτό το βίντεο

Leo Goolden fabricates and shapes teak cap rails for a wooden sailing vessel, utilizing a multi-step process to achieve an organic, tapered profile. After dry-fitting the teak sections to the stanchions using mortise-and-tenon joints, he uses a router to round over the bottom edges.7:23 To create the top profile, he draws a scale design and planes the wood into a series of flat facets, increasing the number of faces to nine to approximate a curve.9:38 He applies chalk to the wood surface as a visual guide while planing freehand to ensure symmetry and fairness.15:44 He finishes the shaping by planing diagonally across the grain and sanding with 80-grit paper.16:23 The cap rails feature a wider section to serve as a pin rail for belaying lines.3:53 The teak will remain unfinished to provide better grip for crew and to avoid the high maintenance of varnish in an area prone to impact.19:27

Περισσότερα από το Sampson Boat Co

Sailing through the "Needles"Οκτ 2026Sailing the British South coast!Σεπ 2026Tally Ho meets a tidal mud-berth!Σεπ 2026Tally Ho sails into England after 59 years overseas!Αυγ 2026

Από Sampson Boat Co — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.