Sailing Adventure Can't Wait · βίντεο

Τι καλύπτει αυτό το βίντεο

A bilge pump failure and a leaking dripless shaft seal interrupt Adventure Can't Wait's departure from Santa Rosalia, Baja Mexico, forcing a mid-passage stop at Chivato to make repairs.3:27 The Gulper bilge pump, roughly three years old and lightly used, began leaking from a weep hole; disassembly revealed a torn diaphragm and worn one-way valves.3:35 The rebuild used a replacement kit — new diaphragm, rubber one-way valves, and a duckbill check valve — and proved straightforward enough that the crew notes the Gulper's simplicity as a genuine advantage.6:13 A separate issue: the dripless shaft seal, disturbed during earlier prop shaft alignment work that required shimming the engine laterally by a quarter inch, was dripping enough to trigger the bilge pump every ten minutes underway.0:07 At Chivato, anchored for roughly 30 minutes, the crew tightened the collar and set screws to restore seal pressure, stopping the leak.9:15 The boat then continued an overnight passage toward Escondido, approximately 100 miles from Santa Rosalia, through calm, bioluminescent water.12:24 Hardwiring the bilge pump without a disconnect complicated the repair; the crew flags carrying a spare rebuild kit as essential for the next season.4:40

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Sailing Adventure Can't Wait

Sailing south in Baja! Prop Shaft Problems Before an Overnight PassageΙουν 2026First sail in 18 months! Overnight passage south the day after we splashedΙουν 2026Transporting our sailboat from Utah to Mexico: The Sea of CortezΜαΐ 2026New Beta 25 Installed! Prepping our sailboat for transport to the Sea of CortezΑπρ 2026

Από Sailing Adventure Can't Wait — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.