Sailing Triteia · βίντεο

Τι καλύπτει αυτό το βίντεο

Installing a Lewmar Ocean Series 65 hatch on an Alberg 30 requires structural preparation, fairing, and a watertight seal. The process begins by test-fitting the hatch and sanding down rough fiberglass edges.0:51 To create a smooth mounting surface, apply West Systems epoxy mixed with 407 low-density fairing filler, keeping the mixture in the shade to prevent premature curing.3:21 Use a cake decorating bag to apply a clean fillet around the hatch perimeter, smoothing it with a popsicle stick.5:08 After sanding and painting the area, install the hatch using butyl tape.9:01 To ensure a secure fit, over-drill the screw holes and fill them with epoxy before final mounting.9:59 The lens must be removed from the frame to access the mounting screws.10:16 While through-bolting is an option, butyl tape provides a sufficiently strong and watertight bond that resists heavy seas.11:17 A mechanical hatch stay can be added later to hold the lid open in rolly anchorages.12:35

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Sailing Triteia

Exploring LA DIGUE Island, Sailing Back to Mahe and Saying Goodbye to VictoriaΣεπ 2026Seeing the World Famous Giant Tortoises of the Seychelles!Σεπ 2026Sailing To The Beautiful Praslin Island in the Seychelles 🏝️Σεπ 2026Victoria Arrives to Victoria, Mahe, Seychelles and We Sail to Silhouette IslandΑυγ 2026

Από Sailing Triteia — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.