Alfredo Contaldo · βίντεο

Τι καλύπτει αυτό το βίντεο

Splicing Dyneema line preserves nearly 100% of its rated breaking strength, whereas knots can reduce that capacity by 40% to 50%.Watch To determine the required length of a splice, multiply the line's diameter in millimeters by 50.1:30 For an 8mm line, this results in a 40cm splice.1:45

The Brummel splice involves separating the 12 strands of the line into two equal groups of six to insert the standing part through the working part, creating an interlocking "eight" shape.2:56 After forming the eye, the working end is fed into the core of the standing part using a splicing needle or fid.5:21 To ensure a smooth transition and prevent bulk, the splice is tapered by extracting and cutting half of the strands halfway through the splice length.8:31 The Mobius Brummel, or locked splice, follows a similar process but creates a more secure, interlocking loop structure before the final bury.12:22 Both methods provide high-strength, permanent terminations suitable for attaching blocks or hardware via cow hitches.20:15

Περισσότερα από το Alfredo Contaldo

Chartwork Problem 5.3.3-2 Sector C (Chart 5D) 🗺️ Unlimited Nautical License ⚓Οκτ 20265.1.1 - 1 Chart Problem Solving 🗺️ Nautical License Over 12 Miles ⚓Οκτ 2026Safe Night Sailing: Complete Guide and Practical Tips ⚓✨⛵⚓Sailing Course Ep. 12Σεπ 2026Sailing from Sardinia to Menorca ⛵ 200 miles beating against the wind ⛵ Sailing Vlog EP.3 ⚓Αυγ 2026

Από Alfredo Contaldo — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.