VOILIER ODIN · βίντεο

Τι καλύπτει αυτό το βίντεο

Fabricating a custom metal arch for a sailboat involves measuring, cutting, tack-welding, and final welding of steel tubing to ensure structural alignment. The process begins by securing the main tubes to the boat's transom using articulated mounting brackets to establish the required width and vertical plumb.4:50 Three cross-members are cut to a precise 47-centimeter length to maintain parallel alignment between the two main uprights.5:58 After tack-welding the structure in place on the boat, the arch is removed to a flat surface for final welding, which provides better access and stability.8:34 Reinforcement gussets are fabricated, bent, and welded into the corners to prevent movement and increase rigidity.12:39 The builder plans to install rubber gaskets between the mounting plates and the hull to dampen vibration and noise.16:29 Once welding is complete, the structure is ground smooth, treated with anti-rust primer, and finished with multiple coats of paint.22:01 The project concludes with the application of paint via a dabbing technique to ensure full coverage in crevices.23:35

Σκάφη σε αυτό το βίντεο

Περισσότερα από το VOILIER ODIN

TOP NAVIGATION - WORTH REPEATING WITHOUT HESITATIONΑυγ 2026WHY I'M MOVING BACK TO FRANCEΙουλ 2026THIS IS ALSO WHAT BOAT LIFE IS LIKEΙουν 2026BETWEEN DUNES and SHIPWRECK MUSEUMΙουν 2026

Από VOILIER ODIN — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.