Ravenswing · βίντεο

Τι καλύπτει αυτό το βίντεο

Rebuilding a Nissan Tohatsu 9.8 two-stroke outboard requires precise alignment of the piston ring bevels with the locating pins to ensure the pistons seat correctly in the cylinders.2:53 During reassembly, the power head should be removed from the main body to facilitate easier access to the throttle assembly, carburetor, and electrical components.5:59 After initial assembly, the engine experienced uncontrolled high-RPM revving, which was traced to incorrect ignition timing.14:16 According to the shop repair manual, the timing must be adjusted by positioning the advancer link rod so the coil plate rotates counterclockwise to contact the stopper when the throttle valve is fully closed.15:20 The project also required replacing a corroded original carburetor with a $36 aftermarket unit, which features a single air-mix adjustment screw.18:06 Proper lubrication with two-cycle oil during assembly is essential for smooth operation of the crankcase and internal components.3:09

Περισσότερα από το Ravenswing

A Labrador & her people go sailingΔεκ 2025An Uncle meets his Nephew sailing, part 2Νοε 2025An uncle meets his nephew during a sailing cruiseΟκτ 2025Sailing to Hawaii in the 2023 Transpac LA to Honolulu race.Ιουλ 2023

Από Ravenswing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.