The Mariner · βίντεο

Τι καλύπτει αυτό το βίντεο

Chris, sailing solo across the Atlantic toward the UK on his boat *Osprey*, reports autopilot "drive stopped" errors caused by slippage in the rudder stock clamp.7:06 The autopilot’s mechanical arm connects to a carbon fiber clamp on the rudder shaft, but the clamp lacks sufficient friction to prevent vertical movement under load.7:25 To resolve the issue, Chris cleans the carbon surfaces and installs a grippy, rubberized drawer liner between the clamp and the rudder stock to increase friction and maintain the correct alignment.14:22 He notes that carbon components can facilitate galvanic corrosion when in contact with dissimilar metals, requiring careful maintenance.12:17 During the passage, he uses PredictWinds GFS and European Centre for Medium Range Weather Forecasting models to determine his route, preferring the latter for accuracy.0:36 He also compares great circle and rhumb line navigation settings on his B&G chart plotter, noting a 13-mile difference over a 1,460-mile distance.3:13 Proper friction and secure clamping are essential for maintaining autopilot integrity on high-load carbon rudder systems.

Περισσότερα από το The Mariner

Sailing to Newport, my Trimaran Project & Notes on Archive Management for L- Matrix AI'sΙουλ 2026Taking a Look Around the Waterfront in Lunenburg, Nova ScotiaΙουν 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary EngineΜαΐ 2026Introducing Longitudinal AI SystemsΜαΐ 2026

Από The Mariner — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.