RAN Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

Johan and Malin extend their custom-built sailboat hull from 50 to 52 feet to create a larger swimming platform at the stern.▶ 11:57 The process involves cutting the existing hull at the original design line and constructing a new transom extension using PT foam sandwich panels.▶ 12:08 To shape the foam to the hull's compound curves, Johan makes 80 kerf cuts in the material.▶ 22:29 The team builds a temporary mold using narrow wood planks glued to the hull perimeter to support the foam during the initial interior fiberglass lamination.▶ 19:57 Before beginning the structural extension, they verify the hull's rigidity by taking measurements to ensure the structure does not shift after removing the final temporary frame.▶ 15:01 Inside the boat, the crew completes the guest cabin ceiling using 25mm PT foam panels and plans a recessed drawer for the nav station to maximize storage without obstructing cabin space.▶ 0:30 They finish the week by painting the bilges with two-component polyurethane paint.▶ 18:38

Περισσότερα από το RAN Sailing

Port Side Toe Rail & Deckhouse Carbon Corners - Ep. 494 Ran SailingΙουλ 2026The Boat Gets Its Edge - Ep. 493 Ran SailingΙουν 2026Opening Up The Deckhouse: The Last Window Cutout - Ep. 492 Ran SailingΙουν 2026The Last Major Lamination on Our 52ft Sailboat! - Ep. 491 Ran SailingΙουν 2026

Από RAN Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.