BoatworksToday · βίντεο

Τι καλύπτει αυτό το βίντεο

Andy installs a full Victron electrical suite into the V-berth of a 1970 Westwind Paceship 24, a 24-foot sailboat undergoing a complete refit.2:37 The system includes two 300-amp-hour Epic batteries and a Victron inverter-charger.3:20 To verify the layout in the confined space, he builds a physical mock-up using OSB templates to represent the battery bank and inverter footprints.3:59 The V-berth area measures approximately 6.5 feet in length and beam.4:26 Because the inverter-charger requires four inches of clearance on all sides for cooling, vertical mounting on the knee walls proved impossible.9:32 Andy decides to mount the unit horizontally in the center trunk area.10:00 To mitigate heat buildup from horizontal mounting, he plans to use a Victron Cerbo to trigger two DC computer fans, which will circulate air through the compartment and out a stainless louver.11:48 Accessory components, including the shunt and distributor, will mount on the outboard side of the knee walls behind removable access panels.13:59

Σκάφη σε αυτό το βίντεο

Περισσότερα από το BoatworksToday

Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraΙουλ 2026Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!Ιουλ 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!Ιουλ 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!Ιουν 2026

Από BoatworksToday — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.