Stuck Trudesign Valves during MCA Inspection and solution
26 Μαΐου 2026 · 2 λεπτά · 847 προβολές
Man taps TruDesign valve with rubber hammer in engine room
Τι καλύπτει αυτό το βίντεο
A Trudesign composite through-hull valve on Leon Schulz's Hallberg-Rassy 46 seized during an annual MCA inspection of a commercially coded vessel.▶ 0:07 The valve — a toilet discharge outlet — had locked up from urine-salt crystals forming a crust around the mechanism.▶ 1:44 The MCA inspector refused to force it, fearing breakage, and was about to log it as a defect.▶ 0:56 Before the inspector left, Schulz found a Trudesign promotional video showing their valves surviving hammer blows after being frozen in ice.▶ 1:13 He struck the stuck valve with a rubber mallet, the crystal crust broke loose, and the valve moved freely again.▶ 1:41 Closing it confirmed the toilet discharged nothing, proving the valve was fully functional.▶ 1:44 Trudesign valves are noted as the only composite through-hulls approved for engine-room installation under MCA coding rules.▶ 0:38 Schulz recommends exercising seldom-used Trudesign valves more frequently to prevent crystal buildup, though he notes they normally require no maintenance.▶ 1:58
Σκάφη σε αυτό το βίντεο
Περισσότερα από το Leon Schulz, Reginasailing
Από Leon Schulz, Reginasailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.