Sailing SV Delos · βίντεο

Τι καλύπτει αυτό το βίντεο

The engine room build for an aluminum catamaran involves a multi-stage process of fairing, painting, insulating, and installing complex mechanical systems. To create a level bilge surface, the builder fills voids around the keel with TotalBoat fairing compound and pours epoxy over the top, allowing for efficient bilge pump placement.1:23 The aluminum surfaces are cleaned, primed with three coats, and finished with chemical-resistant bilge paint to protect against corrosion and tool damage.17:40 Soundproofing is achieved using Vetus insulation panels of varying densities, with 50mm thickness on the roof and 30mm on the bulkheads.27:16 The fuel system features a custom-built manifold using L-valves, allowing the engine to draw from or return fuel to either the port or starboard tank.28:34 Airmar fuel flow sensors integrated into a NMEA 2000 network calculate real-time fuel consumption by measuring the difference between feed and return lines.31:27 The starboard engine room houses the electric motor controller, autopilot, and water distribution manifolds, all mounted on trays to prevent saltwater damage to electronics during maintenance.32:04

Περισσότερα από το Sailing SV Delos

Years of Work...One Flip of a Switch 🤯 Aluminum Catamaran Build Pt. 81Αυγ 2026Rethinking Our Propulsion System 🤔 Aluminum Catamaran Build Pt. 80Ιουλ 2026The SECRET About Our Roof 🤯 Aluminum Catamaran Build Pt. 79Ιουλ 2026The Toilet Episode 💩 Aluminum Catamaran Build Pt. 78Ιουλ 2026

Από Sailing SV Delos — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.