Tips from a Shipwright · βίντεο

Τι καλύπτει αυτό το βίντεο

Louis Sauzedde constructs stable, non-racking sawhorses for shop use by prioritizing flat, non-twisted lumber for the top rail.1:07 He cuts the 2x6 top rail at a 15-degree angle on both sides to allow the legs to mount flush.7:11 Each leg requires a compound cut, achieved by swinging the chop saw 5 degrees and tilting it 15 degrees.12:28 To ensure stability, he braces the legs with 2x4s and adds plywood plates to the ends, securing them with screws to prevent racking.8:11 He emphasizes that the legs should be canted to improve stability, especially when using the horses for staging.3:47 By keeping the assembly slightly flexible during the initial fastening, he ensures all four legs sit perfectly flat on the shop floor before final tightening.19:40 These sawhorses are designed to support heavy loads by transferring weight directly through the legs rather than relying solely on fasteners.24:51

Περισσότερα από το Tips from a Shipwright

Building Orca - Ep. 23: Mold FIVEΜαρ 2026Progressive BevelingΦεβ 20261958 Harley Davidson Panhead Motorcycle - For SaleΦεβ 2026Building Orca - Ep. 22: Lofting Pt. 3 - Full Scale LinesΙαν 2026

Από Tips from a Shipwright — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.