Tips from a Shipwright · βίντεο

Τι καλύπτει αυτό το βίντεο

Louis Sauzedde installs the guards and inwales on the TotalBoat Sport Dory, using a table saw to cut a 45-degree chamfer on the bottom edge of the guards.0:45 To accommodate the stock's natural curvature, he attaches a wooden auxiliary fence to the table saw to safely guide the piece.1:54 He fastens the guards to the hull planking and stem before fitting the inwales, which he clamps to the frame heads and trims flush against the transom.5:38 He omits gunwale caps to prevent water from trapping against the hull finish.14:50 During a subsequent question-and-answer session, Sauzedde confirms the dory will not feature a sailing rig, though he notes the design allows for future retrofitting.17:34 He estimates the boat's weight at approximately 110 pounds and advises novice builders to start with a simple rowing skiff rather than a complex dory.22:44 He also discusses his interest in future projects, including a potential 16-foot or 18-foot skiff.31:59

Περισσότερα από το Tips from a Shipwright

Building Orca - Ep. 23: Mold FIVEΜαρ 2026Progressive BevelingΦεβ 20261958 Harley Davidson Panhead Motorcycle - For SaleΦεβ 2026Building Orca - Ep. 22: Lofting Pt. 3 - Full Scale LinesΙαν 2026

Από Tips from a Shipwright — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.