SmoCo Sailingβίντεο
Project mini-sode 5 | Coppercoat Antifouling Bottom Paint on Our Sailboat
17 Δεκεμβρίου 2025 · 25 λεπτά · 1K προβολές · San Carlos, Mexico
Man mixes coppercoat paint under sailboat hull in marina
Τι καλύπτει αυτό το βίντεο
A couple DIY-refitting a 43-foot sailboat in San Carlos applied Coppercoat antifouling paint to their hull after sanding off old layers.0:40 They hired a local contractor to sand the hull to the substrate, saving weeks of manual labor.1:35 The process involved applying two coats of CK246 epoxy barrier coat, followed by four coats of Coppercoat.1:56 The crew followed a strict two-to-one mixing ratio for the epoxy and adhered to a 20-to-30-minute pot life, which required mixing in smaller batches to prevent premature hardening.2:07 They monitored the barrier coat’s cure time by touch, waiting until the surface was tacky but not transferring residue to their fingers before applying subsequent layers.4:01 After the paint cured for several days, they sanded the hull with 320-grit sandpaper to expose the copper particles, using Scotch-Brite pads for crevices and hard-to-reach areas.14:14 The project required over 60 hours of manual sanding.24:40 Proper surface preparation and strict adherence to cure times between coats are essential for a successful Coppercoat application.
Περισσότερα από το SmoCo Sailing
Από SmoCo Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.
The Sailing Directory Newsletter
Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.