Sailing Uma · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of the Pearson 36 *Uma* successfully removed the vessel's keel to address long-standing grounding damage and structural delamination at the keel joint. After drilling through the keel to access the original 12 bronze J-bolts, the team used a custom-built drill bit to clear resin and debris, eventually separating the keel from the hull. They replaced the original hardware with eight one-inch stainless steel bolts, installing them with JB Weld to ensure 100% thread engagement and structural redundancy. To reinforce the keel stub, the crew applied seven layers of fiberglass and approximately 20 kilograms of resin, utilizing a vacuum bagging technique to remove air bubbles and ensure a uniform, high-strength laminate. The repair process involved tapering the glass layers into the hull to create a continuous, reinforced structure. The project concludes with the keel stub significantly stronger than the original factory specification.

Σκάφη σε αυτό το βίντεο

Περισσότερα από το Sailing Uma

Our boat won’t look the same after this | Step 495Αυγ 2026The ONE Thing We Disagreed on This Entire Refit | Step 494Αυγ 2026We Owe You The Full StoryΙουλ 2026We spent $10,000 on something Pretty | Step 493Ιουλ 2026

Από Sailing Uma — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.