Sailing Umavídeo
Estamos a cortar a nossa quilha (Parte 3 de 4) | Passo 450
25 de julho de 2025 · 38 min · 146K visualizações
O que este vídeo aborda
The crew of the Pearson 36 *Uma* successfully removed the vessel's keel to address long-standing grounding damage and structural delamination at the keel joint. After drilling through the keel to access the original 12 bronze J-bolts, the team used a custom-built drill bit to clear resin and debris, eventually separating the keel from the hull. They replaced the original hardware with eight one-inch stainless steel bolts, installing them with JB Weld to ensure 100% thread engagement and structural redundancy. To reinforce the keel stub, the crew applied seven layers of fiberglass and approximately 20 kilograms of resin, utilizing a vacuum bagging technique to remove air bubbles and ensure a uniform, high-strength laminate. The repair process involved tapering the glass layers into the hull to create a continuous, reinforced structure. The project concludes with the keel stub significantly stronger than the original factory specification.
Barcos neste vídeo
Mais de Sailing Uma
De Sailing Uma — veja o barco, a tripulação e todos os vídeos analisados do canal.
The Sailing Directory Newsletter
Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.