Breaking Waves · βίντεο

Τι καλύπτει αυτό το βίντεο

Fabricating and installing custom lazy jacks on a 14-foot boom requires measuring the distance from the gooseneck to the mast top, multiplying that figure by 2.75, and doubling the result to determine the total line length.1:33 Attaching the lazy jack lines to the ends of the spreaders rather than the mast provides a wider opening, which prevents battens from snagging during mainsail hoists when the boat is not pointed directly into the wind.1:55 The installation involves riveting stainless steel U-straps to the spreaders to secure the pulleys.5:14 Separately, troubleshooting Raymarine electronics often requires checking individual connections throughout the vessel, as the system functions similarly to a series of Christmas lights.6:41 Attempting to repair a leaking dinghy with internal tube sealant proved ineffective after 24 hours, leading to the decision to replace the unit with a new Highfield model.14:43

Περισσότερα από το Breaking Waves

THE FINAL Passage! | Sailing New Caledonia to New ZealandΙουλ 2025Boatlife - From Sea To Fire| INSANE ACTIVE VOLCANO Trek and Our Final Sail from VanuatuΑπρ 2025OFFGRID In the Jungle: A Primitive Community ExperienceΜαρ 2025THE TRUTH UNCOVERED | What Sailing Is ACTUALLY Like In The Remote Corners Of the Pacific OceanΜαρ 2025

Από Breaking Waves — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.