Alfredo Contaldo · βίντεο

Τι καλύπτει αυτό το βίντεο

Alfredo Contaldo demonstrates how to create a loop in double-braided polyester line by splicing two ends together.▶ 0:06 The process requires a splicing needle, a multi-tool, a marker, and adhesive tape.▶ 1:02 First, mark two points on each end of the line to serve as guides.▶ 1:06 Extract the inner core from the outer cover at these marks, taking care to avoid damaging the fibers.▶ 1:30 Taper the ends of the cover to facilitate insertion.▶ 2:20 Feed one end of the cover into the other, bypassing the core, and repeat the process for the second end.▶ 3:47 Once the loop takes shape, trim the excess core material and milk the cover to smooth the splice.▶ 5:38 Finally, secure the connection with a few stitches using a single strand extracted from the line, following the weave of the cover for a clean finish.▶ 6:07 Seal the remaining thread ends with a lighter.▶ 7:47 This method creates a functional loop but does not maximize the breaking strength of the line for applications like extending sheets or halyards.▶ 8:37

Περισσότερα από το Alfredo Contaldo

How to pass the chartwork exam for the boating license beyond 12 miles in 2026Ιουν 2026Propeller Shaft Bushing Replacement - 3-Blade Folding Propeller and Zincs 🛠 Onboard Work ⛵Μαΐ 2026What is a SELF-TACKING JIB ⛵ Pros and Cons and how it works on a sailboat ⛵Απρ 2026Can multitools and Swiss Army knives still be used after the "anti-maranza" decree?Μαρ 2026

Από Alfredo Contaldo — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.