Sailing Uma · βίντεο

Τι καλύπτει αυτό το βίντεο

Dan and Kika are replacing the soft fabric dodger on their boat, Uma, with a custom-built hard dodger.4:41 The project begins with a preliminary mock-up using thin wood strips and a glue gun to determine the physical volume, height, and sightlines for the helm.5:11 To ensure the structure accommodates the main winches and provides adequate clearance for the companionway, the crew extends the aft section of the dodger.8:32 They use a string-based reference grid to establish a center line, accounting for the boat's slight asymmetry, and then construct a second, more accurate template using 12mm plywood.15:22 This test build allows for adjustments to window angles and panel shapes before cutting the final pieces from marine-grade plywood.12:42 The final assembly is screwed together and checked for symmetry, with corner measurements showing a variance of only 1mm to 3mm.20:04 The next phase involves fairing the structure and glassing the interior and exterior surfaces.20:52 Building a physical template before cutting expensive marine plywood prevents costly errors in geometry and fit.12:36

Περισσότερα από το Sailing Uma

Our boat won’t look the same after this | Step 495Αυγ 2026The ONE Thing We Disagreed on This Entire Refit | Step 494Αυγ 2026We Owe You The Full StoryΙουλ 2026We spent $10,000 on something Pretty | Step 493Ιουλ 2026

Από Sailing Uma — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.