Living For Sail · video

Hva denne videoen dekker

John, the owner of the boat Antidote, permanently deletes a forward deck hatch to reduce leak points and deck clutter.3:58 After consulting with other owners of the same boat model, he decides to core the opening with Divinycell H100 foam rather than replacing the hatch.10:53 He first attempts to create a fiberglass patch by laminating 1708 biaxial cloth on a table, but abandons the method when the laminate proves too flimsy to maintain the deck's crown.10:18 He pivots to a foam-core approach, fitting the foam into the cutout and using blue steel weights and internal bracing to hold it flush while the epoxy cures.12:25 To ensure structural integrity, he applies three layers of 1708 glass to the underside of the deck, alternating the fiber orientation to 0/90 and 45-degree angles for added strength.20:31 He uses an inspection light and a fin roller to eliminate air bubbles during the overhead lamination process.23:52 The project requires maintaining a minimum temperature of 60 degrees Fahrenheit for proper epoxy curing.15:39

Båter i denne videoen

Mer fra Living For Sail

This Was Inside The Boat!? — Should I Put It Back?sep. 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataug. 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!juli 2026⛵️ This DIY Sailboat Repair Has To Work... Right?juni 2026

Fra Living For Sail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.