VOILIER ODIN · video

Hva denne videoen dekker

Repairing and painting a 10-ton steel sailboat requires careful surface preparation to prevent corrosion before launch. After moving the vessel with straps that damaged the existing paint, the owner patches the hull by sanding down to the metal, applying filler, and sealing with chlorinated rubber paint.2:44 To treat rust on the keel, the owner uses a hammer and chisel to remove loose scale, followed by a wire-wheel grinder to reach bare metal.9:41 Three coats of Ferose rust converter are applied to the keel and hull patches, followed by multiple layers of antifouling paint.12:04 The owner emphasizes that bare steel must be sealed within hours of grinding to prevent flash rust.12:59 Final preparations include installing new anodes, ensuring electrical continuity between them and the hull, and marking 60 meters of anchor chain at 10-meter intervals.20:42 After completing these tasks, the boat is successfully launched, with plans to finalize engine commissioning through a Beta Marine technician to maintain warranty coverage.30:30

Mer fra VOILIER ODIN

Sailing under asymmetric spinnaker with a Sun Odysseyaug. 2026TOP NAVIGATION - WORTH REPEATING WITHOUT HESITATIONaug. 2026WHY I'M MOVING BACK TO FRANCEjuli 2026THIS IS ALSO WHAT BOAT LIFE IS LIKEjuni 2026

Fra VOILIER ODIN – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.