MJ Sailing · video

Hva denne videoen dekker

The crew prepares the catamaran’s bridge deck and galley area for painting by sanding seams and applying fiberglass.0:19 To bond the hull-to-deck seams, they use a belt sander and grinder to reach bare fiberglass, then apply TotalBoat polyester structural repair putty to fill voids.2:07 They reinforce these non-structural seams with two layers of fiberglass cloth, saturated with polyester resin, and finished with peel ply to compact the laminate and simplify fairing.5:25

For the interior painting phase, the crew tapes off cabin sides and galley bulkheads, ensuring surfaces are prepped and marked with their sanding grit to prevent contamination.8:08 They clean surfaces with acetone to avoid print-through issues encountered in previous sessions.9:39 After applying paint, they use a specialized foam tape to blend new paint lines with existing finishes.15:11 The process concludes with removing masking tape to reveal clean edges on white oak trim.13:51 Proper surface preparation, including acetone wipes and grit-specific sanding, prevents paint defects like print-through and ensures a smooth finish on flat surfaces.

Mer fra MJ Sailing

How Can a Light Switch Be SO COMPLICATED??!! (MJ Sailing - Episode 381)aug. 2026Painting the Accent Walls On Our Home Built Catamaran (MJ Sailing - Episode 380)juli 2026The Details That Keep a Boat Dry (MJ Sailing - Episode 379)juni 2026Preparing Our Catamaran for Paint—and Me for Captain's Schooljuni 2026

Fra MJ Sailing – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.