Alfredo Contaldo · video

Hva denne videoen dekker

Routine maintenance for a Yanmar 3JH marine inboard engine includes changing the oil, replacing the oil and fuel filters, swapping the impeller, and tensioning the alternator belt.0:11 To drain the oil, use a manual pump inserted into the dipstick tube to extract approximately 5 liters.0:47 When replacing the oil filter, smear a small amount of clean oil on the new gasket to ensure a proper seal, and tighten it by hand to avoid over-tightening.3:32 Before removing the impeller, close the engine raw water intake to prevent flooding.4:38 Lubricate the new impeller with the provided grease and ensure the vanes are oriented for clockwise rotation.4:45 After replacing the fuel filter, fill it with clean diesel to minimize the need for manual bleeding.6:48 Bleed the fuel system by opening the bleed screw on the filter housing and pumping until air-free fuel emerges.7:28 Adjust the alternator belt tension by loosening the mounting bolts on the slotted adjustment bar, aiming for a maximum deflection of one centimeter under finger pressure.7:22

Mer fra Alfredo Contaldo

Safe Night Sailing: Complete Guide and Practical Tips ⚓✨⛵⚓Sailing Course Ep. 12sep. 2026Sailing from Sardinia to Menorca ⛵ 200 miles beating against the wind ⛵ Sailing Vlog EP.3 ⚓aug. 2026⛵ STUCK by the MAESTRALE in SARDINIA⚓30 knots at anchor - Trekking 🥾 and Snorkeling 🤿🌊 sailing vlogjuli 2026From Sicily to the Balearics by way of Sardinia ⛵ 460 miles by sailboat with Maurizio EP. 1juli 2026

Fra Alfredo Contaldo – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.