Living For Sail · video

Hva denne videoen dekker

A Liberty 458 owner repairs a rotten transom by replacing the original plywood core with Kusa Blue Water 26 panels.0:29 After removing the rotted wood, the owner grinds the inner fiberglass skin to bare glass using a 7-inch polisher and a Makita 9031 belt sander.2:36 Moisture meter readings reveal residual dampness in the upper transom, forcing a delay in the final fiberglass layup to allow for further drying.19:53 To install the new core, the owner cuts the Kusa panels into smaller, manageable "pucks" rather than attempting a vacuum-bagged installation.24:30 These panels are bonded to the transom using TotalBoat Thixo Pro, a pre-thickened epoxy dispensed via a caulking gun, which allows for precise application and prevents large batches of epoxy from overheating.26:45 The owner uses a bench-top sander to refine the fit of the individual pucks before bonding them in place.26:56

Båter i denne videoen

Mer fra Living For Sail

This Was Inside The Boat!? — Should I Put It Back?sep. 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataug. 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!juli 2026⛵️ This DIY Sailboat Repair Has To Work... Right?juni 2026

Fra Living For Sail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.