Expedition Evans · video

Hva denne videoen dekker

Removing thick, ablative anti-fouling paint from a salvaged sailboat hull requires a high-pressure washer, though results vary significantly by hull section. Using a 4,000 psi pressure washer, the crew successfully stripped the starboard side, but found the port side paint significantly more stubborn.11:34 An attempt to apply environmentally friendly paint stripper using a Harbor Freight airless sprayer failed because the product consistency was too thick for the equipment.7:07 Manual application of the stripper also proved ineffective after a two-hour soak, despite manufacturer recommendations for longer dwell times.11:15 The project is complicated by structural damage around the keel, where delaminated fiberglass requires careful handling to prevent water intrusion into the hull.13:43 The crew ultimately completed slightly more than half of the bottom cleaning before running out of time and fuel for the rental equipment.16:50

Mer fra Expedition Evans

What It's Really Like Anchored Off a UNINHABITED Island | EE 176mai 2026Why Everyone is QUITTING Sailing | EE 175mai 2026We Are No Different Than Any Other Sailor (we might be WORSE) | EE 174mars 2026HOW WE EAT? (first we have to catch it) | EE 173mars 2026

Fra Expedition Evans – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.