Expedition Engineering · video

Hva denne videoen dekker

Brett and Jade fabricate carbon fiber base plates for a custom hardtop arch on their sailboat.0:34 After glassing the interior and exterior of the plates with epoxy, they perform a test fit of the support legs on deck.0:10 Using triangulation and geometry, they verify the alignment of the arch legs within a quarter-inch tolerance while accounting for the boat's complex deck angles.6:50 The pair measures the vertical clearance to ensure the structure provides adequate headroom.8:03 Following the successful test fit, they decide to remove the legs and transport the entire hardtop assembly to their shop to build a jig for final construction.8:47 This decision delays their planned sailing departure by at least one week as they prioritize completing the structural project over immediate cruising.12:05

Mer fra Expedition Engineering

The Reason We’ve Changed (27)aug. 2026One Year Update - Custom Carbon Fiber Hardtop (26)juli 2026Wake-Up Call: The Critical Failure That Could Have Been VERY BAD (25)juni 2026Our Boat Kept Getting Slower. This Was Why. (24)juni 2026

Fra Expedition Engineering – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.